Designing a composite component for the best overall performance


The use of Carbon-fiber-reinforced polymers [CFRP] achieved higher speeds and process parameters with a high stiffness to weight ratio.


Anker A1

XXL Machines – light, rigid and superfast for Milling, Laser, Sanding, Ultrasonic, Waterjet, Adhesive

Anker ACM

Anker Custom Made carbon fiber designs, panels or frameworks. „Y/Z ultrastiffness axis Travers/Beams“

Anker ASW

Anker Service Workshop with two machines in our workshop and a deep knowledge about production technology.


Anker A1​

In addition to the classic milling processing of very large components, the systems can also be used or adapted for processes such as grinding, waterjet cutting, pasting, contour measurement, ultrasound scanning, and laser cutting.

The system strokes are freely configurable as standard. x-stroke from 5,000mm to 150,000mm (150m), y-stroke from 2,000mm to 9,000mm, z-stroke from 500mm to 7,000mm b-axis +/- 95°, c-axis +/- 200°

As the y- and z-axis are constructed in lightweight design using carbon fiber-aluminum, very low masses are accelerated and moved. This results in technical and economic advantages such as:

  • very high dynamics due to high accelerations
  • very high travel speeds
  • very low maintenance due to very low wear of moving parts
  • extremely low energy costs
  • no elaborate foundation required, normal heavy-duty flooring is sufficient


Anker ACM

Based on the long-standing experience of the employees at Anker-Tec, we are able to offer specialized solutions. Our focus is on large lightweight systems for various tasks.
We are capable of individually developing large multi-axis systems and designing them to meet specific customer needs using FEM (Finite Element Method). These can be truss systems made of carbon fiber tubes or systems made from carbon fiber composite panels. The production of the panels takes place in our own panel manufacturing facility.

Our services include the development and construction of such systems.

Examples include: handling bridges, machine portals and Z-axes, complete custom machines, truss systems for wind tunnels, or towing bridges

Services & Maintenance

Anker ASW

Currently two 5-axis machines are available for customer orders.

Specifications Machine 1

3-axis machining: 9,650mm x 4,000mm x 1,500mm

5-axis machining: 8,450mm x 2,800mm x 1,500mm

All non-metallic materials such as pastes, GRP (glass-reinforced plastic), CFRP (carbon-fiber-reinforced plastic), wood, foams, etc., can be processed.
Aluminum machining is possible for standard machining (not high material removal rate).

Specifications Machine 2

3-axis machining: 13,000mm x 4,100mm x 1,900mm

5-axis machining: 11,800mm x 2,900mm x 1,900mm

All non-metallic materials such as pastes, GRP (glass-reinforced plastic), CFRP (carbon-fiber-reinforced plastic), wood, foams, etc., can be processed.

Brands that trust our craft

„Designing a composite component for the best overall performance in each machine application requires understanding the customer’s requirements and the pros and cons of various composite manufacturing techniques“
J. Knapp
Job title


FIll out the form below and we will contact you as soon as possible

Nach oben scrollen